We present armored entrance doors made of 1.2 mm. powder coated metal and 8 mm. Chipboard panels.

The structure of the wing consists of two chipboard panels, with a thickness of 8 mm., between which a metal sheet with a thickness of 1.2 mm is placed. The wing is 70 mm thick, with noise filling and thermal insulation from mineral wool. On the side of the non-adjustable hinges, the wing is reinforced with three passive spikes, which enter the frame when the door is closed.

The door is equipped with two independent locking systems, each with three active pins.

The case is adjustable, with ledges on both sides. It is made of 1.5 mm. powder-coated metal. The door has a factory-fitted rubber seal along the frame, with a metal “L-shaped” threshold profile, also with a rubber seal, which helps to better isolate and make the threshold easier to build.

The overall dimensions of the wing with the case can be 860/1970 mm. or 900/2000 mm, covering walls up to 210; 340; 500 mm.

The door is equipped with two independent locking systems, each with three active pins. It is also equipped with six passive spikes that enter the frame when the wing is closed.

The set includes:

– wing;

– adjustable cash register;

– rubber gasket for case;

– three non-adjustable hinges;

– six anti-burglary spikes;

– metal L-shaped profile;

– two independent locking systems;

– two secret locks: main and additional;

– two secret cartridges;

– stainless steel satin active handle;

– a spyhole.